|
|
Build Your Online Product Catalogs?
Via In Pad fr4 pcb sheet, using copper plating or epoxy to fill holesfor circuit board factor, prevent solder paste or flux from flowing into the via in pad, avoid solder ball getting into via or solder mask cover on pad and cause false soldering. HUIHE CIRCUITS Via In Pad PCB has passed ISO9001/ISO13485/IATF16949/UL/RoHS/REACH certification.
Via In Pad Fr4 PCB List
10 Layer Impedance Control Resin Plugging PCB
16 Layer ENIG Press Fit Hole PCB
6 Layer ENIG via-in-pad Prototype PCB Board
6 Layer ENIG via-in-pad PCB Prototype Service
6 Layer ENIG via-in-pad PCB
8 Layer ENIG via-in-pad PCB
What Is A Hole-In-The-Panel Circuit Board?
The hole in the disk is an important part of the multi-layer PCB China. It is not only responsible for the main functions of the PCB, but also the cost of drilling usually accounts for 30% to 40% of the fr4 circuit board manufacturing cost. In short, the holes pressed on the pads on the PCB can all be called holes in the disk.
Processing Requirements For Hole Plugs In The Disk
No solder mask ink entering the hole
There should be no tin beads hidden in the hole
No explosive oil, ink pads, making it difficult to mount components, etc.
|
| Company: |
Xinfeng Huihe Circuits Co., Ltd.
|
| Contact: |
Mr. hhcir cuits |
| Address: |
Building 2, Xinda Park, Lvyuan Road, Xinfeng County, Ganzhou 341600, Jiangxi |
| Postcode: |
341600 |
| Tel: |
+86 135 3751 8062 |
| Fax: |
|
| E-mail: |
|
|
|
|
Home
